10.1 inch Diagonal-1280x800 IPS HDMI/VGA/AV Display-CQR0476

From CQRobot-Wiki
Jump to: navigation, search
File:CQRZ-0143-1.jpg
DMX Shield for Arduino

Introduction

This 10.1 inch high-resolution 1280 * 800 IPS display is especially designed as a monitor for Raspberry Pi and other mini PC. The HDMI/VGA/AV interfaces ensure its wide compatibility. Making a digital photo frame, playing a video, adding a face for your robot, you can expand your imagination, make more fun.

NOTE

  • Kit does not contain power parts, buyers need their own configuration.
  • For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to the native 1280x800 in case it doesn't detect the resolution properly.
  • The easiest way to edit the config.txt is to put the Pi TF card into an every day computer and edit config.txt with any text editor and save.

Display


Scenes

Specification

Parameter Value
Screen Size: 10.1 inch
Screen Dimensions: 217 mm * 135mm / 8.54 inches * 5.31 inches (16 : 10)
Display Dimensions: 230 mm * 150 mm * 5.2mm / 9.05 inches * 5.9 inches * - 0.2 inches
Panel Type: a-Si TFT-LCD Panel
Resolution (RGB): 1280 * 800, WXGA
Display Mode: HFFS, Normally Black, Transmissive
Surface: Hard Coating
Brightness: 350 cd/m^2
Contrast Ratio: 800 : 1 (Min.)
Input Voltage: 7.5V to 12 V
Rated Power: 6 W to 7W
Signal Input: AV + VGA + HDMI (HDMI 1.2)
Weight: 344g

LCD screen parameters

Parameter Value
Screen size: 10.1 inch
Touch screen: Not support
Screen Dimensions: 217mm x 135mm / 16:10
Display dimensions: 230mm x 150 x 5.2 mm
Panel Type: a-Si TFT-LCD Panel
Panel Size: 10.1"
Resolution (RGB): 1280x800, WXGA
Display Mode: HFFS, Normally Black, Transmissive
Surface: Hard coating
Brightness: 350 cd/m^2
Contrast Ratio: 800:1 (Min.)

Outlinedrawing


SHIPPING LIST

  • 1 * HDMI+VGA+2AV LCD Controller Board
  • 1 * 10.1 inch 1280 * 800 IPS LCD Panel
  • 1 * LVDS Cable
  • 1 * Keyboard with Wire

DOCUMENTS


CQshopping car1.png Shopping from CQRobot Store