Difference between revisions of "RS232 to RS422/RS485 Serial Converter-CQR1218"

From CQRobot-Wiki
Jump to: navigation, search
(→‎Description)
(→‎Description)
Line 1: Line 1:
 
[[File:9018DT-1.jpg| right |thumb|400px|RS232 to RS422/RS485 Serial Converter]]
 
[[File:9018DT-1.jpg| right |thumb|400px|RS232 to RS422/RS485 Serial Converter]]
−
==Description==
+
=='''INTRODUCTION'''==
−
*CQR-1218 is a universal RS232 to RS485/RS422 bidirectional converter, designed to extend the RS232 transmission distance and the interface converter designed for the RS485/RS422 bus, which consists of a number of CQRobot independent innovation technology. It Includes built-in data collision protection control, the power supply and signal lights and inhibition of TVS transient voltages protection. In order to adapt to RS422 / RS485 with much bus wiring, it provides a terminal at port, DB9 and RJ45 physical interface, that effectively adapt to a variety of connection mode, making the bus from multiple directions to be better contacted and more convenient to be implemented. The equipment adopts the aluminum shell of sandblasting and anti-oxidation, which can effectively shield the external interference and have good heat dissipation.
+
CQR-1218 is a universal RS232 to RS485/RS422 bidirectional converter, designed to extend the RS232 transmission distance and the interface converter designed for the RS485/RS422 bus, which consists of a number of CQRobot independent innovation technology. It Includes built-in data collision protection control, the power supply and signal lights and inhibition of TVS transient voltages protection. In order to adapt to RS422 / RS485 with much bus wiring, it provides a terminal at port, DB9 and RJ45 physical interface, that effectively adapt to a variety of connection mode, making the bus from multiple directions to be better contacted and more convenient to be implemented. The equipment adopts the aluminum shell of sandblasting and anti-oxidation, which can effectively shield the external interference and have good heat dissipation.
  
−
"CQR-1218 interface converter supports the following four communication modes:"
+
'''CQR-1218 interface converter supports the following four communication modes:'''
  
−
*1. Point to point / 4 full duplex.
+
*Point to point / 4 full duplex.
−
*2. Point to multi-points/four-line full-duplex.
+
*Point to multi-points/four-line full-duplex.
−
*3. Point to point/twine and half duplex.
+
*Point to point/twine and half duplex.
−
*4. Point to multi-points/two-line and half duplex.
+
*Point to multi-points/two-line and half duplex.
  
−
"To prevent the reflection and interference of the signal, a matching resistor is needed at the terminal of the line (the parameter is 120 ohm 1/4w) when the converter is used as full duplex or half duplex wiring."
+
To prevent the reflection and interference of the signal, a matching resistor is needed at the terminal of the line (the parameter is 120 ohm 1/4w) when the converter is used as full duplex or half duplex wiring.
  
 
==APLLACATIONS==
 
==APLLACATIONS==

Revision as of 14:24, 5 May 2018

File:9018DT-1.jpg
RS232 to RS422/RS485 Serial Converter

INTRODUCTION

CQR-1218 is a universal RS232 to RS485/RS422 bidirectional converter, designed to extend the RS232 transmission distance and the interface converter designed for the RS485/RS422 bus, which consists of a number of CQRobot independent innovation technology. It Includes built-in data collision protection control, the power supply and signal lights and inhibition of TVS transient voltages protection. In order to adapt to RS422 / RS485 with much bus wiring, it provides a terminal at port, DB9 and RJ45 physical interface, that effectively adapt to a variety of connection mode, making the bus from multiple directions to be better contacted and more convenient to be implemented. The equipment adopts the aluminum shell of sandblasting and anti-oxidation, which can effectively shield the external interference and have good heat dissipation.

CQR-1218 interface converter supports the following four communication modes:

  • Point to point / 4 full duplex.
  • Point to multi-points/four-line full-duplex.
  • Point to point/twine and half duplex.
  • Point to multi-points/two-line and half duplex.

To prevent the reflection and interference of the signal, a matching resistor is needed at the terminal of the line (the parameter is 120 ohm 1/4w) when the converter is used as full duplex or half duplex wiring.

APLLACATIONS

  • Singlechip, Surveillance Camera
  • Barcode Scanner
  • Fingerprint Attendance Machine
  • Computer PDA (WINCE system)
  • Label Printer
  • Engineering Exchange
  • Industrial Control
  • Safety Access Control

Display

9018DT-2.jpg
9018DT-3.jpg
9018DT-4.jpg
9018DT-5.jpg
9018DT-6.jpg
9018DT-7.jpg

SPECIFICATION

  • Interface features: Compatible with standard EIA/TIA RS-232C/RS-485/RS-422.
  • Electrical interface: RS-232 to DB9 connector; RS-422/RS-485 interface type: terminal, RJ-45, DB9.
  • Protection level: 600W lightning surge protection for each RS-422, RS-485 interface.
  • Operation mode: asynchronous, half duplex, or asynchronous full duplex.
  • Signal indicator: power (PWR), transmission (TXD), reception (RXD).
  • Transmission medium: Twisted pair or shielded wire.
  • Transmission rate: 115.2K BPs to 300M, 38.4K BPS to 2.4KM, 9600 BPS to 5KM.
  • Size: 113mm * 55mm * 25mm.
  • Working temperature: -25 to 70 Centigrade.
  • Relative humidity: 5% to 95%.
  • Transmission distance: 1200meters. (1152bps-9600bps)

DISTRIBUTION LIST

  • 1 * RS232 to RS485/RS422 Convertor with Charger
  • 1 * Serial Cable
  • 1 * DB9 to 5P Converter
Retrieved from "http://www.cqrobot.wiki/index.php?title=RS232_to_RS422/RS485_Serial_Converter-CQR1218&oldid=1684"